Is your Whirlpool refrigerator not cooling as it should? Or have you noticed a strange noise coming from the compressor? If yes, then it may be time for a compressor reset. But before you call in the professionals and spend tons of money on repairs, why not try resetting the compressor yourself? In this post, we will guide you through simple steps on how to reset your Whirlpool refrigerator compressor quickly and easily without any special tools or expertise needed. So sit back, grab a cup of coffee, and let’s get started!
Unplug the refrigerator from the wall
Start by unplugging the refrigerator from the wall. You may have to reach behind it to find the plug, so be careful not to knock anything over when you do this.
Once the fridge is unplugged, open up the back panel and locate the compressor. It will look like a small black box with wires running to it.
There should be a switch on the compressor itself, or on the wire leading to it. Flip this switch to the “Off” position.
Now that the power is off, you can unscrew the access panel and take a look at the inside of the compressor. If there is any dirt or debris build-up, carefully clean it away.
Once everything is clean, screw the access panel back on and flip the switch back to the “On” position. Plug your fridge back in and wait for it to start cooling again.
Remove the back panel of the fridge
- Unplug the refrigerator and pull it out from the wall.
- Locate the back panel of the fridge, which is usually located at the bottom of the unit.
- Remove the screws that hold the panel in place, using a screwdriver.
- Pull off the panel to access the compressor.
- Disconnect any wires or hoses that are connected to the compressor before removing the panel.
Locate the compressor
Locate the compressor: The compressor is usually located at the back of the refrigerator, near the bottom. In some models, the compressor may be located underneath the refrigerator.
For more information, consult the refrigerator’s user manual.
If You Are Looking For Refrigerator Repair Service In UAE
Your refrigerator is not working properly, you can call a refrigerator repair service in UAE to fix the problem. These services are available in most of the major cities in UAE, and they will send a technician to your home to fix the problem. The technician will first diagnose the problem and then give you a quotation for the repairs.
It is important to choose a reputable service provider who has experience in repairing refrigerators. You can ask your friends or relatives for recommendations. Once you have shortlisted a few providers, you can compare their prices and services.
Make sure that you understand the terms and conditions of the service before signing any contract. Some service providers may charge extra for parts and labor, so be sure to ask about these charges upfront.Once the repairs are completed, make sure that you test the refrigerator to see if it is working properly. If you are not satisfied with the repairs, you can always call the service provider back to have the problem fixed. When it comes to refrigerator repair in UAE, there’s no one better than Hafixer Come. Contact us today to schedule a service appointment.
REPAIR SERVICES AVAILABLE 7/24
- Oven Repair
- Dryer Repair
- Stove Repair
- AC Repair
- AC Installation
- Fridge Repair
- Refrigerator Repair
- Dishwasher Repair
- Washing Machine Repair
there is no power, reset the overload protector by flipping the switch or pressing the button
Your Whirlpool refrigerator compressor isn’t working, you may need to reset the overload protector. To do this, simply flip the switch or press the button on the overload protector. This will reset the compressor and allow it to start working again.
Plug the fridge back in and turn it on
Assuming the power outage was caused by a tripped circuit breaker, re-set the breaker. If it trips again, there may be a short circuit in the fridge. Call an appliance repair person.
If the power outage was caused by a blown fuse, replace the fuse with one of the same amperage. If it blows again, there may be a short circuit in the fridge. Call an appliance repair person.
Why You Might Need to Reset the Compressor?
Whirl pool refrigerator compressor isn’t working properly, you may need to reset it. This can be done by unplugging the fridge for 24 hours, then plugging it back in and turning it on. You should also check that the condenser coils are clean and that there is no debris blocking the airflow. If the compressor still doesn’t work after doing these things, you may need to replace it.
How to Reset the Compressor?
Here’s how:
- First, unplug the fridge and remove the access panel on the back. Locate the compressor start relay and capacitor. With a multimeter, check for continuity between the two terminals on the start relay. If there is no continuity, replace the start relay.
- Next, check the capacitor. It should be free of corrosion and leaks. If it shows signs of damage, replace it.
- Now, reassemble the access panel and plug the fridge back in. The compressor should now start and run normally.
What to Do If the Compressor Won’t Reset?
The compressor on your Whirlpool refrigerator won’t reset, there are a few things you can do to troubleshoot the issue. First, check to make sure that the power cord is plugged into an outlet and that the outlet has power. Next, check to see if the refrigerator is set to the correct temperature. If both of these things are fine, then it’s possible that the compressor is faulty and will need to be replaced.
In conclusion, resetting a Whirlpool refrigerator compressor is relatively simple and straightforward. With the help of this guide, you now know how to check if your compressor needs a reset, turn off the circuit breaker, remove the overload protector or capacitor, use a multimeter to measure resistance inside it and then reinstall it. Following these steps will ensure that your Whirlpool refrigerator runs smoothly without any issues so you can enjoy cold drinks and fresh food whenever you need them!